Login       My Wishlist
  My Cart
$0.00 / 0 items
 
Otto Construction FTF
Helping Contractors and Home Owners Complete Any Project
 
International Access
Global Shipping Options Available
Home About Us News Our Blog Our Catalog My Cart My Account Track Shippment Contact Us
  Our Catalog

Starrett - Blowout Sale! Save up to 80%


Blowout Sale! Up to 80% off on Starrett products at Otto Construction FTF. Hurry! Limited time offers. Offers valid only while supplies last.



Starrett FS-24 Steel Professional Framing Square, 24'' x 16'' Length
Starrett FS-24 Steel Professional Framing Square, 24" x 16" Length
SKU: #36129
In Stock
$17.99
$15.30
You Save: 15%

sku: 36129, mpn: FS-24, ean: 0049659361292,

The FS-24 professional one-piece tempered steel framing square features permanently stamped 1/8" graduations on both sides.The FS-24 Professional Framing Square has a one-piece tempered steel 24" x 2" body and a 16" x 1-1/2" tongue. The face and back...


Starrett 63168 SM44W Steel Tape Measure with Adhesive Back, 1/2-Inch x 4'
Starrett 63168 SM44W Steel Tape Measure with Adhesive Back, 1/2-Inch x 4'
In Stock
$10.70

mpn: 63168, ean: 0049659631685,

Steel precision tape measure that sticks to almost any surface. Lies flat, cuts to size with scissors. Useful on a work bench, butcher block, drafting table, radial arm saw.. Whenever repetitive measurements are required.Starrett Measure Stix provide...


Starrett 166C Pin Vise With Insulated Octagonal Handle, 0.050''-0.125'' Range
Starrett 166C Pin Vise With Insulated Octagonal Handle, 0.050"-0.125" Range
In Stock
$26.04
$23.42
You Save: 10%

mpn: 166C, ean: 0049659506112,

681-50611 Features: -Jaws on all are hardened and with a few turns of the binding nut, a firm grip may be obtained. -Insulating PVC handle which is octagon shaped, preventing them from rolling when laid down. -Hole extends through the full length of ...


Brass Drive Pin Punch, 3/8 In Tip, 8 In L
Brass Drive Pin Punch, 3/8 In Tip, 8 In L
In Stock
$25.52
$10.57
You Save: 59%

mpn: B248E, ean: 0094704864020,

' Brass Drive Pin Punch, Tip Size 3/8 In, Length 8 In, 2-Piece Design, Brass Punch w/Black Steel Knurled Grip Construction, Size Stamped on Head 'Price For: Each Meets/Exceeds: - Hex (In.): - Tether Capable: Standard Tool (Accessory Needed for Tether...


Indicator Contact Point, 1/8L x 1/2 Round
Indicator Contact Point, 1/8L x 1/2 Round
In Stock
$18.05
$8.62
You Save: 52%

mpn: PT06632-4, ean: 0094713865902,

' Dial Indicator Contact Point, Thread Size 4-48, Construction Steel, Features 1/2 In. Wide, Round Head 'Price For: Each Construction: Steel Features: 1/2" Wide, Round Head Item: Dial Indicator Contact Point Overall Length (In.): 1/8 Thread Size: 4-4...


Starrett 505P-7 Miter Saw Protractor
Starrett 505P-7 Miter Saw Protractor
In Stock
$29.99
$27.99
You Save: 7%

mpn: 505P-7, ean: 0094713866503,

Legendary Starrett accuracy takes error prone calculations out of the process of setting up miter cuts. Simply set your saw to the angle that you read on the protractor.Laser engraved dial for accuracy. Constructed from durable engineered plastic. Te...


Brass Drive Pin Punch, 3/16 In Tip, 8 In L
Brass Drive Pin Punch, 3/16 In Tip, 8 In L
In Stock
$19.35
$9.46
You Save: 51%

mpn: B248B, ean: 0094705020760,

' Brass Drive Pin Punch, Tip Size 3/16 In, Length 8 In, 2-Piece Design, Brass Punch w/Black Steel Knurled Grip Construction, Size Stamped on Head 'Price For: Each Meets/Exceeds: - Hex (In.): - Tether Capable: Standard Tool (Accessory Needed for Tethe...


Starrett 268A Cast Iron 2 V-Block 1-1/2'' Square, 2'' Long, 1-1/8'' Capacity (1 Pair)
Starrett 268A Cast Iron 2 V-Block 1-1/2" Square, 2" Long, 1-1/8" Capacity (1 Pair)
In Stock
$70.00

mpn: 268A, ean: 0049659512878,

Starrett 268A V BLOCKS (PAIR)- 1-1/8" CAPACITYCast iron construction. 1-1/2" (38mm) square and 2" (50mm) long. ...


Starrett 565B 4'' Overall Length, 11/16'' Pin Length, 3/32'' Pin Diameter, Drive Pin Punch
Starrett 565B 4" Overall Length, 11/16" Pin Length, 3/32" Pin Diameter, Drive Pin Punch
SKU: #827525790-827525780-20146
In Stock
$22.99
$4.65
You Save: 80%

sku: 827525790-827525780-20146, mpn: 565B, ean: 7844908499541,

The Starrett 565B drive pin punch has a 4" overall length with an 11/16" pin length and a 3/32" pin diameter to push pins and rivets into or out of a workpiece. The punch is made from hardened and tempered steel components that provide wear resistanc...


Starrett S828HZ Wiggler and Center Finder Complete with Case and 4 Attachments
Starrett S828HZ Wiggler and Center Finder Complete with Case and 4 Attachments
In Stock
$64.00
$57.21
You Save: 11%

mpn: S828HZ, ean: 0049659530643,

' Wiggler/Center Finder Set, Disc Dia 0.100 In, Ball Dia 0.250 In, Shank Dia 0.375 In, Length 4 In, Tool Steel Construction, Includes Pointed Shank, Ball and Disc Contacts, Offset Indicator Holder, Case 'Includes four attachments: Ball Contact, Disc...


Starrett 278B Clamp, 1'' Diameter Hold Capacity
Starrett 278B Clamp, 1" Diameter Hold Capacity
In Stock
$25.38

mpn: 278B, ean: 0049659513134,

Starrett 278B CLAMP ONLY FOR 278 V-BLOCKPrecision ground to extreme accuracy. Vees are central, parallel, and square with the ends and sides. Hardened and ground steel construction. Numbered in series so the vees in each set are always in alignment. ...


Starrett D0312  3-1/2-Inch Diamond Grit Edge Hole Saw
Starrett D0312 3-1/2-Inch Diamond Grit Edge Hole Saw
In Stock
$104.15

mpn: D0312, ean: 0049659567434,

Diamond Edge Hole Saws-Saw Diameter: 3 1/2". Permanently bonded to a tough steel body provides the necessary clearance for cutting at high speeds They will cut rapidly through reinforced plastics, germanium, asbestos/substitutes. and other abrasives ...


Starrett D0314  3-1/4-Inch Diamond Grit Edge Hole Saw
Starrett D0314 3-1/4-Inch Diamond Grit Edge Hole Saw
In Stock
$115.58

mpn: D0314, ean: 0049659567410,

Diamond Edge Hole Saws-Saw Diameter: 3 1/4". Permanently bonded to a tough steel body provides the necessary clearance for cutting at high speeds They will cut rapidly through reinforced plastics, germanium, asbestos/substitutes. and other abrasives ...


Starrett 3814 Analog Bench Hardness Tester
Starrett 3814 Analog Bench Hardness Tester
In Stock
$2,998.00

mpn: 3814, ean: 0049659677546,

The 3814 Hardness Tester provides reliable Rockwell Hardness values on all types of metal and alloys, hard or soft, and in many shapes. This reliable bench hardness tester has a high quality casting, is ergonomically designed for easy operation and i...


Starrett 98-6 6-Inch Precision Machinists Level
Starrett 98-6 6-Inch Precision Machinists Level
SKU: #681-50441
In Stock
$131.00
$114.91
You Save: 12%

sku: 681-50441, mpn: 98-6, ean: 5055413670505,

4.2 out of 5 stars with 45 reviews
Precision machinists' level with a graduation of 0.42 mm/m, or 80-90 seconds. Ground glass main vial is graduated, and adjustable to a positive setting, for accurate results. Cross-test vial enables simultaneous leveling in two directions for precise...


Starrett 98-8 8'' Precision Machinists' Level with Main and Cross-Test Vials
Starrett 98-8 8" Precision Machinists' Level with Main and Cross-Test Vials
SKU: #50442
In Stock
$162.00
$143.00
You Save: 12%

sku: 50442, mpn: 98-8, ean: 0049659504422,

4.8 out of 5 stars with 38 reviews
The Starrett 98-8 precision machinists’ level is an 8" long spirit level with a graduated main vial that has a sensitivity of 0.42 mm/m or 80 to 90 seconds for determining horizontal plane and a cross-test vial that enables simultaneous leveling in...


Starrett 278 2 V-Blocks (1 Pair) And 2 Clamp Complete Set
Starrett 278 2 V-Blocks (1 Pair) And 2 Clamp Complete Set
In Stock
$302.00
$264.99
You Save: 12%

mpn: 278, ean: 0049659513127,

4.1 out of 5 stars with 51 reviews
'V-Blocks and Clamp Set, Rectangular, Steel, Capacity 1 In., 2 Holes, Length 1 5/8 In., Width 1 1/4 In., Height 1 1/4 In., Includes 2 V-Blocks, 2 Clamps'Blocks are made steel, hardened and ground and numbered in series so that the V's in each set are...


Starrett 568C 2 V-Blocks And 2 Clamp (Matched Pair) Complete Set, 2'' Diameter Round Capacity, 1-7/16'' Square Capacity (1-9/16'' With Screw At Top)
Starrett 568C 2 V-Blocks And 2 Clamp (Matched Pair) Complete Set, 2" Diameter Round Capacity, 1-7/16" Square Capacity (1-9/16" With Screw At Top)
In Stock
$499.00
$439.00
You Save: 12%

mpn: 568C, ean: 0049659525922,

4.0 out of 5 stars with 38 reviews
3/8-16 tapped holes permit mounting blocks on faceplates or angle irons. Each block is 2-1/2" Length x 3" Width x 2" Height.Hardened steel, precision ground parallel and square. V-grooves are ground central and parallel to the sides and base perfect ...


Starrett 568A V-Block And Clamp For Round Or Square Work, 2'' Diameter Round Capacity, 1-7/16'' Square Capacity (1-9/16'' With Screw At Top)
Starrett 568A V-Block And Clamp For Round Or Square Work, 2" Diameter Round Capacity, 1-7/16" Square Capacity (1-9/16" With Screw At Top)
In Stock
$235.00
$223.99
You Save: 5%

mpn: 568A, ean: 0049659525908,

4.6 out of 5 stars with 54 reviews
3/8-16 tapped holes permit mounting blocks on faceplates or angle irons. Each block is 2-1/2" Length x 3" Width x 2" Height.Hardened steel, precision ground parallel and square. V-grooves are ground central and parallel to the sides and base perfect ...


Starrett D0412 4-1/2-Inch Diamond Grit Edge Hole Saw
Starrett D0412 4-1/2-Inch Diamond Grit Edge Hole Saw
In Stock
$197.08

mpn: D0412, ean: 0049659567519,

Diamond Edge Hole Saws-Saw Diameter: 4 1/2". Permanently bonded to a tough steel body provides the necessary clearance for cutting at high speeds They will cut rapidly through reinforced plastics, germanium, asbestos/substitutes. and other abrasives ...



Viewing Page 1 of 2

Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service
© 2018 - ottoconstructionftf.com. All Rights Reserved.